MODEL A FORD
Clutch

WALNUT GEAR SHIFT KNOB -- WALNUT GEAR SHIFT KNOB

W-7213        A walnut knob with “Ford script.  All Years     ea.  10.95

  CLUTCH PEDAL SHAFT -- The mounting shaft for brake and clutch pedals.

A-7506-B         1928-31     ea.  6.50

BRAKE PEDAL SHAFT COLLAR -- Fits on the end of the pedal shaft.

B-7507     1928-31     ea.  4.50

PEDAL BUSHINGS -- Bushing can be used both for the clutch and brake pedal, and in the bell housing.
Takes two per pedal.

B-7508         1928-34     ea.  2.25

PEDAL SHAFT RETAINER PIN -- Holds shaft into bell housing.

A-7509-A      1928-31     ea.  .95

COLLAR RIVET -- Holds collar onto the pedal shaft.

A-7509-B     1928-31     ea.  .95

BRAKE & CLUTCH PEDAL SHAFT SET -- Set includes: shaft, 4 bushings, and pins.

A-7506/09     1928-31     set  12.95

BRAKE CLEVIS PIN -- Special clevis pin for the Model A stop light link.

A-7533     1928-29         ea.  2.00

CLUTCH RELEASE SHAFT -- An 11" shaft made in the U.S.A.

A-7510     Late 28-31 Not for AR transmission     ea.  6.50

SPRING WASHER -- Fits on pedal shaft between clutch and brake pedal and prevents side play.

A-7512     1928-31         ea.  .95

CLUTCH SHAFT RELEASE PIN -- Holds clutch shaft to the housing.

A-7513     1928-31         ea.  .95

CLUTCH THROW OUT FORK

A-7515     Late 1928-31         ea.  18.50

ADJUSTING CLUTCH ARM ROD & TRUNNION NUT
 

A-7521-BS    1929-31     ea.  9.00

TRUNNION NUT -- The trunnion nut for the adjusting arm.

A-7522-B     1929-31         ea.  2.25

CLUTCH DISC - NEW Heavy duty clutch facing & six internal springs. Better that the original & made in the U.S.A.

B-7550         1928-48         ea.  45.00
 

CLUTCH ALIGNMENT TOOL

A-7550-T      1928-48         ea.  4.95

CLUTCH RELEASE BEARING HUB

A-7561-B        1928-31         ea.  22.00

CLUTCH RELEASE BEARING HUB SPRING -- Return spring for the throw out bearing.

A-7562         1929-31         ea.  1.45

REBUILT PRESSURE PLATE -- Super quality rebuilt plate. Sold on exchange only.

B-7563         1928-34         ea.  105.00

 CLUTCH & FLYWHEEL PILOT BEARING

B-7600         1928-34         ea.  5.95

 CLUTCH THROW OUT BEARING -- A lubricated throw out bearing that should always be replaced when replacing the clutch.

B-7580         1928-48         ea.  28.95

FLYWHEEL DOWEL RETAINER -- Plate to hold the dowels in the flywheel

A-7609         1928-31         ea.  2.25

Little Dearborn Parts, Inc   2424 University Avenue   Minneapolis, MN 55414
Toll Free: 1-888-282-2066   Phone: 612-331-2066   Fax: 612-331-3847
Copyright © 2001 - Little Dearborn - All Rights Reserved