Model A Carburetors

MODEL A FORD
Carburetors

ZENITH CARBURETOR PARTS

Knurled Pins for choke and throttle shaft

A-9506-P pr. 1.25

Passage Plugs

B-9510-PP -- set of 4 set. 2.30

Oversized Throttle shaft & lever bushings for standard shaft

A-9581-BU pr. 2.25

CARBURETOR TO INTAKE GASKET

B-9447 1928 - 34 ea. .75

B-9447-C 1928 - 34 Copper ea. 2.95

ZENITH CARBURETOR + TILLOTSON -- Core required on all Carbs.

A-9510 New 1928 - 34 Zenith ea. 360.00

Rebuilt Zenith Carburetor ea. 205.00

Rebuilt Tillotson Carburetor ea. 205.00

GASKET SET -- Gaskets used when rebuilding the carburetor. We carry both the A and B gasket sets.

A-9502-S 1928 - 31 Zenith set 2.00

A-9502-T 1928 - 31 Tillotson set 2.00

B-9502-Z 1932 - 34 Zenith Model B set 2.25

B-9519-2 1928 - 31 Zenith Bowl Gasket ea. .50

ZENITH CARBURETOR PARTS -- All parts are high quality and are excellent reproductions.

A-9528 Adjustment needle housing ea. 7.50

A-9545 Secondary well ea. 5.95

A-9547-A Choke shaft (standard size) ea. 4.96

A-9547-B Choke shaft (oversize) ea. 6.95

A-9547-MB Choke shaft lever nut ea. .50

A-9548 Choke shaft lever ea. 2.80

A-9549 Choke plate ea. 2.28

A-9550 Float ea. 23.95

A-9512 1928-31 Bolt holds halves of carburetor ea. 1.25

A-9558 Float pin ea. .45

A-9559 Strainer ea. 8.50

A-9570 Adjustment Needle Driver ea. 10.25

A-9577-A Idle mixture screw ea. 3.00

A-9577-B Idle mixture screw ea. 2.75

A-9581 Throttle shaft & lever (standard size) ea. 13.50

A-9581-B Throttle shaft & lever (oversize) ea. 16.50

A-9582-S Idle stop screw ea. .50

A-9585 Throttle plate ea. 6.75

A-9586 Venturi ea. 5.95

A-9590 Lower drain plug ea. 1.85

X-9574 Compensator jet tap ea. 4.95

ZENITH CARBURETOR OVERHAUL KIT -- All the jets, needles and float valve to overhaul carburetor.

A-9590-Z 1928-31 kit 27.50

B-9590-Z 1932-34 Model B kit 42.50

TILLOTSON CARBURETOR REBUILD KIT -- All the jets, needles & float valve to overhaul carburetor.

A-9590-T 1928-31 kit 25.00

TILLOTSON CARBURETOR FLOAT

A-9550-T 1928-31 Float only kit 35.00

CARBURETOR GROSE-JET -- Patented grose-jet float valve corrects those worn out needle problems.

A-9564-GJZ 1929-31 Zenith ea. 16.00

A-9564-GJT 1928-31 TiIlotson ea. 16.00

A-9564-V "Viton" tipped ea. 12.95

"AIR MAZE" AIR CLEANER -- Fits both Tillotson and Zenith carburetors.

A-9600 1928-34 "Ours fits" ea. 28.95

A-9600-F Air Filter ea. 10.50

CHOKE ROD ASSEMBLY -- Complete choke rod assembly including sleeve, spring, & chrome plated knob.

A-9700-B 1928-29 (26") set 12.95

A-9700-C 1930-31 (28-1/4") set 12.95

CHOKE ROD ASSEMBLY PARTS -- All those extra parts needed when rebuilding your choke rod assembly.

A-9705 1928-29 Sleeve ea. 2.00

A-9709 1928-31 Spring ea. .75

A-9715 1928-31 Grommet (Lower) ea. .75

A-9717 1928-31 Grommet (Upper) ea. .75

ACCELERATOR CAP -- Screws onto the accelerator linkage.

A-9725 1928-31 ea. 3.25

FULTON ACCELERATOR PEDAL -- Chrome pedal with rubber insert. A perfect match to our Fulton brake & clutch pedals.

A-9725-F 1928-31 ea. 29.95

ACCELERATOR-SPARK & THROTTLE CONTROL ROD SET Buy the entire set of rods & save some money.

A-9740-S 1928-31 (3-Pieces) set 14.95

ACCELERATOR-SPARK AND THROTTLE CONTROLS -- Cadmium plated control rods ready to install.

A-9737 1928-31 Accelerator Return Spring ea. 2.10

A-9742 1928-31 6" Throttle rod ea. 4.95

A-9747 1928-31 Accelerator 10-1/2" rod ea. 4.95

A-9757 1928-31 Spark rod 16-3/4" ea. 6.95

ACCELERATOR RUBBER PAD

A-9765-P 1928-31 ea. 2.25

ACCELERATOR FOOT REST -- Foot rest with hard rubber insert.

A-9765 1928-31 ea. 5.50

ACCELERATOR FOOT REST BASE -- Cast aluminum base that screws to floorboard.

B-9770 1928-31 Base ea. 3.75